The Beaded Prince Albert Wand gives you not only the profound erotic sensations of a Prince Albert piercing, but also the intense urethral stimulation of a penis plug leading to unparalleled orgasmic experiences!
This exceptionally designed Prince Albert Wand is made from 316L Surgical Steel and has an awe inspiring mirror like finish! It is approximately 11.5 cm (4 1/2) inches in overall length with approximately 10.14 cm (4 inches) of the length being insertable.

The shaft is hollow and lined with beads for approximately the first 63 mm (2 1/2) inches of length. While the shaft is hollow it does have a ball that screws into the top as a cap to the head of your dick to keep it closed up, but it easily unscrews to allow bodily fluids to flow through without having to remove the entire piece this way you get the best of both worlds (hollow & solid).

You have three diameter choices available to choose from 8mm, 10mm, and 12mm, the ball cap size will vary with the diameter of the plug. Each wand comes with three pieces that attach to the side of the plug passing through your Prince Albert Piercing so that you can get a good fit. They are all a standard 9/16 inch in length with a standard 12.7 mm (1/2 inch) ball on the end, but once screwed into the plug you have 10 mm (3/8 inch) from the plug to the 12.7 mm (1/2 inch) ball. These three pieces that pass through your piercing come in 2 gauge, 1 gauge, and 0 gauge each with the standard 12.7 mm (1/2 inch) ball on the end. From the top of the shaft that passes through the piercing to the screw ball cap on the end of the plug is approximately 5/8 of an inch. It is crucial to insure that the specific dimensions for this piece coincide to fit with your piercing to be able to use it correctly.

This impressive beast with have you thinking steamy thoughts from first sight, and will absolutely more than live up to your expectations when it comes to satisfying your erotic wants and needs!