Misc ball stretchers

FM Special order only

I've re-named this the Ball Tamer - why? I've been disappointed so many times waking up when I haven't been wearing weights overnight, and had deliciously soft hanging balls, only to have them gripe uncomfortably (retract tight and shrivel), and look like an oversized walnut! It's hard to get your collars on in that state and it's a turn off too. So I've started using a 'Ball Tamer' when I want to get my collars on in the mornings. It is very effective at taming griping balls, pulling them down quickly and allowing easy access to your stretched sac, for slipping on collars etc. It's also hard to resist admiring in the mirror the hang it can achieve. Of course if you don't have hanging balls already, it's not a magic wand, in giving you instant dangle, but it is fun, erotic, sexy and effective in immediately activating whatever stretch you do have.

Your balls are first clamped with a stainless steel split collar, then stuffed into, and completely encased in the high grade surgical stainless steel cylinder. The collar is screwed tight onto the cylinder at the top, with two retaining screws, and finally the base plate is screwed home below. There is also a loop on the base from which you can hang weights (as if 2.5 lbs is not enough!). Warm it up under the hot tap before putting it on, it feels great! Put plenty of Vaseline on your balls to assist the Tamer to slide down your sac and achieve maximum stretch. Put a film of Vaseline on the steel joins and try filling the Tamer with hot water for extra fun, it adds to the sensation......and the weight! I've recently started adding steel ball bearings inside mine and it rattles intriguingly!

Comes in one inside diameter of collar at the top, 36mm (1 3/8") and the total weight is around 1.1Kg (approx 2.4lbs).


See it in use


Related products:

1. SheaCoa © butter

2. Shea Oil